Lightolier 1104IC 6 3/4" Aperture Incandescent Convertible IC/Non-IC Frame-In Kit - 7" Diameter Ceiling Opening

Lightolier 1104IC Quantity: Price $14.23 Sale Price $13.93

Complete fixture consists of reflector trim & frame in Kit - Select each separately.

Frame-In Kit	Reflector Trims - See Individual Trim Specification Sheets
1104IC	Open Downlight
1104ICQ**	Reflector	Cone	Satin Cone	Cross Blade	Baffles	Basic White	Eyeball	Enclosed Diffusers	Wall Washer
1104ICN	1143	1112+	1108+	1132	1105	1170M1	1182	1121	1185*
11041CNQ**	1144	1113+	1110+		1105WH	1171		1124	1186*
	1144CD	1113BK+			1176			1126*	1186WH
		1113CD+			1176WH			1128*
		1113WH			1179M1			1134*
					1179WH			1177SH*
								1178SH*
								1177LX
								1178LX
								1190
								Open Wet
+ Add NM to catalog number for Natural Metal flange and finish.			*For Non-IC applications only. ** Supplied with intergral push-In wire connectors					1181WH
								1181CD

Features

Housing: .032 (#20 ga.) aluminum. UL listed convertible IC/NON-IC. 2” vertical adjustment in ceiling. Can be removed for access to junction box and ceiling plenum. AirSeal® housing minimizes air leakage to less than 2 CFM at 1.57 PSF (or 75pa), which complies with Model Energy Code (Section 602.3.3) and Washington State Energy Code (Section 502.4) and reduces heat loss and condensation in ceiling.

Mounting Frame: .048 (#18 ga.) galvanized steel. Locks into position along length of mounting bars with locking spring and bendable slot. (3) slots 90° apart simplify alignment.

Junction Box: 2”X 4” X 3 1/2” (22 cu. in.) .032 (#22 ga.) galvanized steel. UL listed for maximum of 8 (#12 ga.) through branch circuit conductors. Integral cable clamps permit attachment of non-metallic (#12 or #14 ga.) Romex® cable without tools or additional connectors.

Mounting Bars: .059 (#16 ga.) galvanized steel. Bars pivot for easy attachment and wire-in below ceiling line. Bars extend to accommodate 16” to 24“ O.C. joist spacing. 1104IC features integral self-tapping phillips screws for secure attachment to wood or metal construction. The 1104ICN features integral nails for secure attachment to wood. Both attach to T-bar ceilings without the need of accessories.

Socket Housing: Impact extruded aluminum or galvanized steel. Attached trim retaining spring secures trim to any height on housing wall.

Socket: Porcelain medium base: nickel plated screw shell. Pre-wired with #18 ga. SF1 (300 VOLT 200° C) leads to junction box.

Thermal Protector: Meets NEC and UL requirements. Located inside housing.

Labels

UL (Type IC/NON-IC Convertible; Suitable for Damp Locations);

Complies with Air Leakage Requirements stated in the Model Energy

Code and the Washington State Energy Code.

Copyright © 1997 - 20011, eLights.com, Inc. All Rights Reserved